Design Research Optics

This cleaning kit from Design Research Optics was developed specifically for CO2 Laser Optics. Unlike other optics we encounter daily, such as eye glasses and camera lenses, CO2 Laser Optics typically have soft, thin-film coatings applied to their surfaces that can easily be scratched and damaged. Therefore, cleaning must be done properly with solvents containing Laboratory Grade Alcohol or Acetone with >99.9% purity and no water content.

Lasers were never intended to be used in harsh industrial environments when they were first developed in the laboratories. Now commonplace in industry, lasers routinely cut and burn plastics, wood, metals and other materials. These expensive optics need protection from the airborne industrial destructive splatter (A.I.D.S.) that they are often subjected to.

This low cost kit contains the basic supplies which will enable you to maintain and remove fumes and back-splattered debris to minimize the absorption and excessive heat load, thus prolonging their lifetime.

SPECIAL OFFER

Complete Kit $19.95


New and improved with glass bottles and glass droppers

Design Research Optics
Laser Optics Cleaning Kit includes:
Isopropyl Alcohol, reagent grade: .25 oz bottle
Acetone, reagent grade: .25 oz bottle
Lens Paper Booklet: 50 sheets
Cotton-Tipped Swab Pack, lint-free: 24
Finger Cot Pack, large, powder-free: 24
Optics Cleaning Instruction Booklet

Replacement supplies may also be purchased separately:
$5.95 INP-2001 Isopropyl Alcohol, reagent grade: .25 oz bottle
$5.95 INP-2003 Acetone, reagent grade: .25 oz bottle
$5.95 INP-2005 Lens Paper Booklet: 50 sheets
$5.95 INP-2006 Cotton-Tipped Swab Pack, lint-free: 24
$5.95 INP-2007 Finger Cot Pack, large, powder-free: 24